Before starting, gather all necessary tools and materials:

Prepare the mounting interface before installation:

• Confirm the mounting hole matches M24x1.5 thread specification
• Check internal threads for debris, rust, or damage
• Clean threads with a cloth to remove dust, oil, or residue
• For mild corrosion, use a soft brush to avoid thread damage
• Apply anti-seize compound for metal ports if compatible

Begin installation by carefully threading the vent by hand:

• Align the vent's threads with the port's threads precisely
• Turn clockwise slowly with even pressure
• Continue until the vent feels snug by hand

After hand-tightening, use tools to secure the vent:

• Use a compatible wrench for final tightening
• Tighten gradually until resistance is felt
• Avoid over-tightening to prevent seal deformation
• Inspect for gaps between vent flange and surface
• Ensure excess sealant doesn't block airflow channels

After installation, verify the vent is properly installed:

• Allow sealant to cure per manufacturer instructions
• Check for air or fluid leaks with gentle pressure
• Conduct visual inspection over a short period
• Ensure vent remains securely fastened
• Verify protective functions are not compromised

Following these steps ensures reliable long-term performance of your M24x1.5 protective vent.

• Always wear protective gloves during installation
• Use thread sealant appropriate for your application environment
• Do not exceed recommended torque specifications
• Inspect vent periodically after installation
• Consult manufacturer guidelines for specific applications